Tools and Materials Needed:
- Kickstand spring (Ensure it's compatible with your Sportster model.)
- Flathead screwdriver or small pry tool.
- 1/4-inch socket wrench or wrench.
- 10mm socket.
Instructions:
1. Prepare the Kickstand:
- Position the motorcycle on a center stand or lift it securely using a motorcycle jack.
- Locate the kickstand on the left side of the motorcycle.
2. Locate the Spring Attachment:
- Identify the existing kickstand spring attachment point on the kickstand. It's usually a metal piece with a hole.
3. Remove the Existing Spring:
- If there is an existing spring, use a screwdriver or pry tool to pry the old spring out of the attachment point. Be careful not to lose any small parts.
4. Prepare the New Spring:
- Take the new kickstand spring and position it so that the coil end faces upward.
5. Insert the New Spring:
- Insert one end of the new spring into the attachment point on the kickstand. Use your fingers to guide it into place.
- Once partially inserted, use the screwdriver or pry tool to gently push the other end of the spring into the attachment point until it's seated securely.
6. Secure the Spring:
- Locate the bolt that holds the spring in place. It's usually a 10mm bolt. Use the 1/4-inch socket wrench or wrench and the 10mm socket to tighten the bolt.
7. Test the Spring:
- Gently press down on the kickstand to ensure that the spring is functioning properly. The kickstand should return to its original position when released.
8. Check Stability:
- Double-check the stability of the kickstand. Make sure it's securely in place and supports the weight of the motorcycle.
That's it! You have successfully installed the kickstand spring on your 88 Harley Sportster.
