If you own a black car, you are well aware of the difficulties in keeping it looking its best. Dirt, water spots, and clearly visible swirl marks and whatnot. As a black car owner, you must exercise greater caution when washing your car because scratches and paint defects are easily visible on black paint. If you’re looking for a detailed guide on how to wash a black car without all of this trouble, you’ve stumbled upon the right place.
To achieve the best results, you must not only practice the proper way of cleaning a black car with caution, but you must also use the proper cleaning materials. The following is a list of some of the items you will need to wash your black car.
Make sure you pick a dedicated car wash soap. Only car-specific soap will do the best job of cleaning your vehicle. Avoid dish soap and laundry detergent at all costs. They can not only leave water spots on your car when you wash it, but they can also damage the paint. This is due to the fact that they are not designed specifically for car washing.
At least a bucket is required for preparing and storing your car washing solution. You’ll need one large enough to hold the water and car wash soap you’ll be using to wash your car.
Since it is gentle and effective on cars, a wash mitt is ideal for soaping them down. It’s gentle on the paintwork of a car. It can also hold more water, allowing for faster washing.
While using the “jet” or spray feature of a hose may be a faster way to rinse your car, it can actually contribute to unsightly water spots on black cars. It’s best to use a hose without a nozzle so that water can flow freely onto your car without leaving water spots.
To dry your car, you’ll need a microfiber cloth. A microfiber cloth has a soft texture that makes it gentle for drying cars, but it can also absorb a lot of water, reducing the amount of effort required to dry your vehicle. In addition, unlike any other cloth or towel, a microfiber cloth is better at trapping lint from a car, which can cause water spots and streaks if left on the surface.
If you want to speed up the drying process of your car, you can use a dryer or a leaf blower. They can also be very useful for drying the wettest and most difficult-to-reach areas in your vehicle.
Applying wax to your car’s surface is a very effective way of preventing damage to the paint, such as permanently baked dirt and scratches. Waxing your car protects it by adding a layer of protection. Water spots would only be visible on the surface of the wax layer if your car had been waxed. And those spots would be easier to remove from the wax layer than they would be from a car’s paint.
If you have water spots on your black car, you can remove them with a water spot remover. A water spot remover is useful for washing or rewashing a car that has developed water spots.
When washing a black car, weather conditions must be taken into account. While washing a car in direct sunlight is not ideal regardless of color, it is more specifically difficult for black ones. Because black cars absorb more visible light than lighter-colored cars, they reach a higher temperature.
When washing a car in the sun, the water on the surface evaporates more quickly. Mineral deposits such as calcium and sodium are left on the surface when water evaporates, resulting in unsightly water spots. We advise you to wash your black car in the shade, on a cloudy day, or in the early morning or evening.
Pour your car wash soap into a bucket of water and lather it up. Then, using your wash mitts, apply the solution to your car and begin washing it.
Washing and rinsing a black car one section at a time is the best way to avoid water spots. This is because you don’t want the soap solution, dirt, and minerals used to wash your car to form water spots on your car after it has been sitting for too long and the water has evaporated.
The proper way to rinse in order to avoid water spots is to use the hose without the nozzle attached. Avoid using the spray because it can leave water spots. Allow the water to freely flow on your car instead of using a spray rinse for a much more refined effect.
Read: How to wash a car like a pro
It is also critical to dry your car immediately after rinsing it so that no water remains on it for an extended time, resulting in water spots. To avoid water spots, it’s best to dry it quickly with a microfiber cloth.
However, if you want to speed up the drying process even further, you can use a drier or leaf blower, especially in the wettest and most difficult-to-reach areas, to dry your car faster. When you’re finished with one section, you can move on to the next. Simply repeat the washing, rinsing, and drying steps for the following sections as well.
Read: How to dry your car after washing
Use the water spot remover according to the application instructions on the label. After rinsing it off, double-check for any remaining water spots. Don’t forget to dry the area of your car that you’re working on once it’s finally water spot-free.
Read: How to remove water spots from your car
Wax application is dependent on the type of wax you use for your car, whether paste, liquid, or spray. Paste and liquid wax can be applied by hand or machine in small, circular motions, whereas spray wax is simply sprayed. You should let the wax sit on your car for a few minutes. Then you would wipe it off your car and polish it.
When kept clean, black cars are arguably the most beautiful of all colors. So, keep them squeaky clean! Follow the instructions mentioned above and get ready to receive compliments from people awestruck by your sleek ride on your divine black car! We hope that with this blog, you have gained the knowledge needed to properly care for your car.
Wondering where to find the best car wash for your car in your location? We recommend you to visit Way.com or download the Way app (available on iOS and Android). Just scan and drive away with a spotless car, and no worries about how to dry it! Enjoy a safe and contactless car wash experience with Way.
