- Flathead screwdriver
- Pliers
Instructions:
1. Locate the two screws on the rear seat cushion. They are located on the left and right side of the seat, just below the headrest.
2. Use a flathead screwdriver to remove the screws.
3. Once the screws are removed, lift up the seat cushion and tilt it forward.
4. Disconnect the seat belt buckles from the seat cushion.
5. Unclip the plastic clips holding the seat cushion to the rear seat back. There are two clips on each side of the seat cushion.
6. Lift the seat cushion out of the vehicle.
7. To remove the rear seat back, first locate the two screws at the bottom of the seat.
8. Use a screwdriver to remove the screws.
9. Once the screws are removed, pull the seat back up and out of the vehicle.
