1. Turn on the ignition and start the engine.
2. Press the "Cruise" button on the left side of the steering wheel to activate cruise control.
3. Set the desired speed by using the "+" and "-" buttons on the right side of the steering wheel.
4. Press the "Resume" button to resume the set speed.
5. Press the "Cancel" button to cancel the cruise control.
Additional tips:
- If you need to temporarily disengage cruise control, you can brake or press the clutch. Cruise control will automatically resume once you release the brake or clutch.
- You can also adjust the following cruise control settings:
- Speed limit: This sets the maximum speed at which cruise control can be engaged.
- Distance alert: This alerts you if you get too close to the vehicle in front of you.
- Cruise control may not work in certain conditions, such as:
- On slippery roads
- In heavy traffic
- When the engine is not running properly
