* A 10mm Allen wrench
* A flathead screwdriver
* A new 12-volt battery (YB16AL-A2)
1. Disconnect the negative terminal of the battery using a 10mm Allen wrench.
2. Disconnect the positive terminal of the battery using a 10mm Allen wrench.
3. Remove the battery hold-down bracket using a flathead screwdriver.
4. Lift the battery out of the bike.
5. Place the new battery in the bike.
6. Secure the battery with the battery hold-down bracket.
7. Connect the positive terminal of the battery using a 10mm Allen wrench.
8. Connect the negative terminal of the battery using a 10mm Allen wrench.
Note: When disconnecting and reconnecting the battery terminals, be careful not to touch the terminals with any metal objects, as this could cause a spark and damage the battery or the bike.