1. Release Latches: Locate the levers or releases for the rear seatbacks. These are usually located on the sides of the seatback, near the bottom, in the cargo area behind the seat, or even partially under the seat cushion. You might need to pull up or push a lever or button. There's typically one for each side of the split seat (60/40 split).
2. Fold Down the Seatbacks: Once the latches are released, push the seatbacks forward to fold them down. They should fold relatively flat into the floor.
3. (Optional) Remove the Seat Cushions: Depending on your cargo needs, you may also need to remove the bottom seat cushions. These usually require lifting up on the front edge and then tilting the cushion forward to remove it completely. There may be small clips or hooks to disconnect, check your owner's manual for specifics.
Important Note: The exact location and operation of the levers/releases may slightly vary depending on the trim level and any optional features your specific 2011 Dodge Ram 1500 Quad Cab might have. Your owner's manual is the best resource for precise instructions and diagrams. Consult it for the most accurate information specific to your truck.
