To find it, you'll likely need to:
1. Consult your owner's manual: It might have a wiring diagram or at least mention the location of the tow package wiring harness.
2. Look behind the kick panel: Remove the lower portion of the driver's side dash panel (kick panel) to expose the wiring harness. This is the most common location.
3. Inspect the wiring harness: Look for a connector with several wires, possibly including a 7-pin or 4-pin connector that's labeled or clearly associated with towing. These connectors often have a cover or protective boot.
4. Use a wiring diagram: A wiring diagram specific to your 2006 Jeep Liberty with the factory tow package will be the most definitive way to find the correct wires. You can often find these diagrams online through automotive repair forums or websites specializing in vehicle wiring.
Important Note: The specific wire colors and connector type may vary slightly. Always double-check the wiring before making any connections. Incorrect wiring can damage your vehicle's electrical system. If you're not comfortable with automotive electrical work, it's best to have a professional install the brake controller.
