For Analog Clock (If Equipped):
1. Locate the Clock Adjustment Knob: This small knob is usually located on the face of the clock itself. It may be a small, recessed knob or a slightly larger button.
2. Press and Hold: Press and hold this knob for a few seconds. This should enable the clock adjustment mode. You may need to hold it down for 2-3 seconds, then release it slightly.
3. Adjust the Time: Rotate the knob to adjust the hours and minutes. Some clocks may require that you go all the way to the desired hour before you can change the minutes. Experiment by turning the knob slowly until you find the adjustment method.
4. Release: Once you've set the correct time, release the knob. The new time should be set.
For Digital Clock (Integrated into Radio):
1. Locate the Clock Settings: This is usually accessed through the radio's menu system. Look for a "clock" or "time" option in the settings. The exact method varies depending on your radio model, but may involve pressing a button labelled "Menu," "Setup," "Mode," or a similar function.
2. Navigate to Clock Settings: Use the radio's buttons (usually arrow buttons or preset buttons) to navigate to the clock setting.
3. Adjust the Time: Use the radio's buttons to adjust the hours and minutes.
4. Save the Settings: Once you've set the correct time, you'll likely need to press a "Save," "OK," or "Enter" button to save the new time setting.
If you have trouble:
* Consult your owner's manual: Your owner's manual is the best resource for specific instructions on setting the clock for your exact vehicle model and radio.
* Search online: Search for "[Year] Chrysler Sebring Radio Manual" or "[Year] Chrysler Sebring Clock Setting" to find helpful videos or online manuals.
Without knowing the exact radio model in your Sebring, it's impossible to give more precise instructions for a digital clock. Always refer to your owner's manual as the primary source for your car's features.
