2. Remove the distributor cap.
3. Remove the spark plugs.
4. Remove the coil from the engine block.
5. Identify the coil terminals:
- + terminal: positive terminal
- - terminal: negative terminal
- TACH terminal: tachometer output terminal
6. Connect the spark plug wires to the coil terminals in the following order:
- + terminal: cylinder 1 spark plug wire
- - terminal: cylinder 4 spark plug wire
- TACH terminal: tachometer wire
7. Connect the positive battery cable to the battery.
8. Install the distributor cap.
9. Install the spark plugs.
10. Start the engine and check for proper ignition.
