* 3/8-inch drive ratchet and socket set
* 1/2-inch drive ratchet and socket set
* 1/2-inch breaker bar
* 3/8-inch drive combination wrench set
* 1/2-inch drive torque wrench
* Floor jack
* 2 jack stands
* Safety glasses
* Gloves
Instructions
1.) Start by disconnecting the negative battery cable.
2.) Remove the two bolts the attach the motor mount bracket to the engine block.
3.) Use a pry bar to pry the motor mount bracket off of the engine block. Be careful not to damage the oil pan.
4.) Remove the two bolts the attach the motor mount to the frame.
5.) Remove the motor mount from the frame.
6.) Install the new motor mount in the reverse order of removal. Be sure to tighten all of the bolts to the manufacturer's specifications.
7.) Reconnect the negative battery cable.
8.) Start the engine and check for any leaks.
