Auto >> AutoSPT >  >> Electric car

Where is the blower resistor in a 2006 mitsubishi Eclipse and How do I get to it?

The blower resistor in a 2006 Mitsubishi Eclipse is located on the passenger side of the vehicle, behind the glove box. To access the blower resistor, follow these steps:

1. Open the glove box.

2. On the right side of the glove box, you will see a plastic panel held in place by two plastic screws. Remove the two screws and pull the panel off.

3. Behind the panel, you will see the blower motor and the blower resistor. The blower resistor is a small, black box with a few wires connected to it.

4. To remove the blower resistor, disconnect the wires and pull it out of its housing.

5. Install the new blower resistor in the reverse order of removal.