* Phillips and/or flat head screwdriver
* Flashlight
* New Blower Motor Resistor
Instructions
1. Find the blower resistor. It is usually located under the dashboard, on the passenger side. It is a small, black box with a few wires coming out of it.
2. Remove the screws holding the blower resistor in place.
3. Disconnect the wires from the blower resistor.
4. Remove the old blower resistor.
5. Install the new blower resistor.
6. Reconnect the wires to the blower resistor.
7. Tighten the screws to secure the blower resistor in place.
8. Test the HVAC motor to make sure that it is working properly.
