1. Locate the remote control. Your remote control may be included in the box with your Sears Lobo car. It may look similar to a small gamepad, with a steering wheel, buttons, and a power switch.
2. Insert batteries into the remote control. Open the battery compartment of your remote control and insert the batteries as indicated by the markings.
3. Turn on the power switch. The power switch on your remote control may be a button or a slide switch. Turn it on by moving it to the "On" or "+" position.
4. Locate the power switch on the car. The power switch on your Sears Lobo car may be a button or a slide switch. It may be located on the bottom of the car or behind a panel.
5. Turn on the power switch on the car. Press or slide the power switch to turn it on.
6. Use the remote control to operate your car. Once both the remote control and the car are turned on, you can use the remote control to steer the car, move it forward and backward, and activate any other features that your car may have.
Here are some additional tips for turning on your Sears Lobo remote-controlled car:
* Make sure that the batteries in the remote control and the car are properly inserted and correctly oriented.
* If the power switch on the remote control or the car is difficult to move, try gently wiggling it back and forth until it moves more freely.
* If your remote-controlled car does not work after you have turned on the remote control and the car, try replacing the batteries in both the remote control and the car.
If you follow these steps and still have difficulty turning on your Sears Lobo remote-controlled car, you may want to consult the car's user manual for more troubleshooting information.
