1. Mount the heater.
- Choose a mounting location that is at least 3 feet (0.9 meters) away from any combustible materials.
- Mark the wall where you want to mount the heater.
- Drill pilot holes for the mounting screws.
- Insert the mounting screws and tighten them securely.
- Hang the heater on the mounting screws.
2. Plug in the heater.
- Plug the heater's power cord into a grounded outlet.
3. Turn on the heater.
- Turn the heater's power switch to the "On" position.
4. Set the thermostat.
- Turn the thermostat knob to the desired temperature setting. The thermostat will maintain the room temperature at the set level by automatically turning the heater on and off.
5. Use the fan settings.
- The heater has two fan settings, low and high. To adjust the fan speed, turn the fan speed knob to the desired setting.
6. Set the timer.
- The heater has a built-in timer that can be set to turn the heater off after a specific amount of time. To set the timer, turn the timer knob to the desired time setting.
7. Turn off the heater.
- When you are finished using the heater, turn the power switch to the "Off" position.
Always read and follow the heater's user manual for specific instructions and important safety information.
