Torx T30 wrench
Torx T40 wrench
Ratchet and socket set
Flat-head screwdriver
Pliers
Step 1: Remove the seat cover
Use the flat-head screwdriver to pry up the plastic covers at the base of the seat.
Use the Torx T30 wrench to remove the bolts holding the seat cover in place.
Pull the seat cover off the seat.
Step 2: Disconnect the seat belt buckle
Use the pliers to press the release button on the seat belt buckle.
Disconnect the seat belt buckle from the seat.
Step 3: Disconnect the seat adjusters
Use the Torx T40 wrench to remove the bolts holding the seat adjusters in place.
Disconnect the seat adjusters from the seat.
Step 4: Remove the seat
Use the ratchet and socket set to remove the bolts holding the seat to the floor.
Lift the seat out of the vehicle.
Step 5: Install the new seat
Lower the new seat into the vehicle.
Insert the bolts into the holes and tighten them with the ratchet and socket set.
Connect the seat adjusters to the seat and tighten the bolts with the Torx T40 wrench.
Connect the seat belt buckle to the seat.
Step 6: Replace the seat cover
Slide the seat cover over the seat.
Secure the seat cover with the bolts and plastic covers.
Your new driver's seat is now installed.
