Here is a general guide on how to move the battery ground wire on a 1200 Sportster:
1. Disconnect the Battery: Before starting any work, disconnect the negative terminal of the battery. This will prevent any electrical shorts and accidents during the process.
2. Identify the Ground Wire: Locate the battery ground wire which is typically black in color. It connects the negative terminal of the battery to the motorcycle's frame.
3. Disconnect the Ground Wire: Use a suitable wrench or pliers to loosen and disconnect the ground wire from the negative battery terminal and from the frame connection point.
4. Determine New Ground Location: Choose a new suitable grounding location on the frame. It should be a clean and unpainted surface that provides a good electrical contact.
5. Prepare the New Grounding Point: If the chosen spot is painted or has a surface treatment, scrape it off to reveal clean metal. This ensures a good electrical contact.
6. Attach the Ground Wire: Position the battery ground wire in its new location and secure it with a nut and bolt or suitable fastener. Make sure the connection is tight and secure to ensure proper electrical contact.
7. Reconnect the Negative Battery Terminal: Once the ground wire is securely attached, reconnect the negative terminal of the battery.
8. Test the Ground: Turn the ignition on and check if all electrical components, including lights, indicators, and other accessories, are functioning properly. If everything works correctly, the ground wire has been successfully moved.
Remember, electrical systems can be dangerous if not handled properly, so it is recommended to consult a motorcycle repair manual or seek guidance from an experienced mechanic if you lack the necessary skills or knowledge to perform the above steps.
If in doubt, always take your Sportster to a qualified motorcycle mechanic.
