1. Make sure the moped is in a stationary position.
2. If your moped has a clutch lever, pull the clutch lever in.
3. Next, locate the gear shifter. It is typically located on the left side of the moped and is connected to the transmission.
4. Move the gear shifter into the neutral position, which is usually between first and second gear.
5. If you feel resistance, you may need to let out the clutch lever slightly to relieve the pressure on the transmission.
6. Once the gear shifter is in the neutral position, the moped is in neutral.
7. To confirm, release the clutch lever and try to roll the moped. If it rolls without the engine engaging, the moped is in neutral.
Note that the steps may vary slightly depending on the specific moped model.
