1. Park your Mercedes on a level surface. Engage the parking brake and put the car in "Park" (for automatic transmissions) or first gear (for manual transmissions). Make sure that the wheels are chocked to prevent the vehicle from rolling.
2. Locate the jack points. Mercedes vehicles have specifically marked jack points located along the pinch welds of the car. These areas are designed to bear the weight of the vehicle and are less likely to cause damage. Usually, there are 4 jack points - two in front and two in the rear.
3. Place the floor jack under the jack point. Position the floor jack carefully so that the saddle fits securely under the jack point. Make sure that the jack is stable and centered to prevent the vehicle from slipping off.
4. Slowly lift the vehicle. Use the floor jack to gradually raise the vehicle until the tire clears the ground. Do not lift the vehicle higher than necessary to avoid putting unnecessary stress on the suspension.
5. Place the jack stands. Once the vehicle is lifted high enough, place jack stands under the car for added support. Jack stands are typically adjustable, so raise them until they securely support the vehicle's weight.
6. Double-check the safety of the vehicle. Before proceeding with any work, ensure that the vehicle is stable and securely supported by both the floor jack and the jack stands. Avoid working on the vehicle when solely supported by the floor jack.
7. Lower the floor jack. Once you're done working on the car, slowly lower the floor jack while making sure that the vehicle remains stable.
8. Remove the jack stands and lower the vehicle. Gently lower the vehicle using the floor jack until the tires are back on the ground. Remove the jack stands and secure the lug nuts back in place.
Additional Tips:
- Consult the owner's manual for specific jacking instructions for your Mercedes model.
- Never place the jack under any plastic parts or body panels, as this could cause damage.
- If you are unsure about any aspect of the jacking procedure, it is best to consult with a qualified mechanic or use a dedicated Mercedes-Benz service center.
