2. Remove the blower motor cover: Remove the screws holding the cover in place and set the cover aside.
3. Disconnect the blower motor electrical connections: Locate and disconnect the electrical connectors that supply power to the blower motor. Carefully detach these connections by pressing down on the release tab and pulling them apart.
4. Remove the blower motor: Locate the mounting screws holding the blower motor in place. Unscrew these mounting screws to loosen the motor and take it out of the housing.
5. Inspect and replace the blower motor (if necessary): Inspect the removed blower motor for dirt buildup, damage, or worn-out brushes. If replacement is necessary, carefully install a new blower motor in the housing.
6. Reconnect the blower motor electrical connections: Reconnect the electrical connectors that you detached in step 3. Make sure the connections are secure.
7. Reattach the blower motor cover: Reattach the blower motor cover that you removed in step 2. Tighten the screws to hold it securely in place.
NOTE: When reinstalling the blower motor, ensure that the air inlet is facing toward the desired direction. Failure to do so may affect the airflow distribution.
