1. Park your car on a level surface and turn off the engine.
2. Engage the parking brake.
3. Chock the wheels to prevent the car from rolling.
4. Locate the handbrake lever in the center console.
5. Pull up the handbrake lever to the highest position.
6. Remove the two screws holding the handbrake lever in place.
7. Lift up the handbrake lever and remove it from the car.
8. Locate the handbrake cables under the car.
9. Disconnect the handbrake cables from the calipers.
10. Remove the old handbrake cables from the car.
11. Install the new handbrake cables in the reverse order of removal.
12. Adjust the handbrake cable tension by turning the adjuster nut on the handbrake lever.
13. Test the handbrake to ensure it is working properly.
14. Lower the car, remove the chocks, and start the engine.
Here are some additional tips for changing the handbrake cable on a Peugeot 206CC:
- Make sure that you have the right tools for the job, including a wrench, a screwdriver, and a pair of pliers.
- If you are not comfortable working on your own car, you can take it to a mechanic to have the handbrake cable replaced.
- Be careful when handling the handbrake cables, as they can be sharp.
