Park your vehicle on a flat surface and apply the parking brake.
Open the rear door of your van and locate the spare wheel access panel. It is usually located on the right-hand side, under the carpet.
Remove the access panel by unscrewing the screws that hold it in place.
Locate the spare wheel. It is usually attached to the underside of the vehicle, with a cable holding it in place.
Remove the cable by unhooking it from the spare wheel.
Lower the spare wheel by pulling it down. Be careful, as the spare wheel may be heavy.
Once the spare wheel is on the ground, you can remove it by unscrewing the lug nuts that hold it in place.
Replace the lug nuts, the cable, and the access panel.
Here are some additional tips for removing the spare wheel from a Citroen Berlingo van:
Make sure that the vehicle is parked on a flat surface and the parking brake is applied. This will help to prevent the vehicle from rolling while you are removing the spare wheel.
Use the correct tools to remove the spare wheel. This includes a lug wrench and a screwdriver or socket set.
Be careful not to drop the spare wheel on your foot. The spare wheel is heavy and could cause serious injury if it falls on your foot.
Once you have removed the spare wheel, store it in a safe place. The spare wheel should be stored in the vehicle, so that it is accessible in the event of a flat tire.
