- A hydraulic jack
- A jack stand
- A chock
- A lug wrench
- A flathead screwdriver
Procedure:
1. Park your Buick Rendezvous on a flat, level surface.
2. Turn on the parking brake.
3. Place a chock behind the rear wheels of your Buick.
4. Jack up your Rendezvous until the tire is off the ground.
5. Place a jack stand under the frame of your Buick, near the front of the vehicle.
6. Lower your Rendezvous until the jack stand is supporting the vehicle.
7. Remove the lug nuts from the wheel you wish to remove and remove the tire.
To lower your Buick Rendezvous, follow these steps in reverse order:
1. Place the lug nuts back on the wheel and tighten them until snug.
2. Lower your Buick until the tire is on the ground.
3. Remove the jack stand and chock.
4. Start your Buick and drive it off the ramps.
