Gather the necessary tools:
- Replacement sidelight/parking light bulb (model specific)
- Flathead screwdriver or trim removal tool
- Gloves to avoid fingerprints on the bulb
Park your vehicle and locate the sidelight/parking light assembly.
- Ensure that your vehicle is parked in a safe area and turned off.
- The sidelight (parking light) assembly is usually located on the side of the headlight assembly, near the front of the vehicle.
Remove the cover panel.
- Depending on the specific vehicle model, the sidelight assembly cover may be held in place by clips or screws.
- Use a flathead screwdriver or trim removal tool to carefully pry the cover off.
Remove the old sidelight bulb.
- Once the cover is removed, you will have access to the sidelight bulb.
- Turn the bulb counterclockwise until it becomes loose.
Install the new sidelight bulb.
- Align the pins on the new bulb with the corresponding holes in the socket.
- Gently insert the bulb by turning it clockwise until it is snug.
- Take care to secure the bulb properly to prevent it from coming loose during operation.
Reinstall the cover panel.
- Place the cover back into its original position and press it to secure it.
Test the sidelight.
- Turn on your vehicle's headlights and check that the sidelight bulb is illuminating correctly.
It is important to ensure that you are using the correct replacement bulb as specified in your vehicle's owner's manual. If you are still unable to effectively change the sidelight after following these steps, or if you have specific questions regarding your model, refer to your vehicle's owner's manual or consult with a qualified mechanic.
