1. Park your vehicle in a safe location and turn off the engine.
2. Open the trunk of your vehicle.
3. Locate the brake light assembly that needs to be replaced.
4. Press the release tab on the brake light assembly and pull it out of the housing.
5. Disconnect the electrical connector from the brake light assembly.
6. Remove the old brake light bulb by turning it counterclockwise.
7. Insert the new brake light bulb into the socket and turn it clockwise to secure it.
8. Reconnect the electrical connector to the brake light assembly.
9. Press the brake light assembly back into the housing until it clicks into place.
10. Close the trunk of your vehicle.
Test the brake lights to ensure that they are working properly.
