1. Park your vehicle in a safe, flat area, and allow the engine to cool down.
2. Open the hood and locate the spark plugs. They are located along the sides of the engine block.
3. Remove the ignition coil bolts using a socket and wrench.
4. Pull the ignition coils straight up to remove them from the spark plugs.
5. Use a spark plug removal tool or a deep socket to remove the spark plugs.
6. Be careful not to drop any of the spark plugs into the engine.
7. Install the new spark plugs into the spark plug tubes, hand tightening them until snug.
8. Replace the ignition coils and torque the bolts to 10 ft-lb.
9. Start the engine and let it run for a few minutes to check for any problems.
