1. Tools you will need:
* Philips head screwdriver
* Flathead screwdriver (optional)
* Trim removal tool (optional)
2. Open the rear door and locate the rear side speaker.
3. Remove the speaker grill by gently prying it off the door panel. There might be a small screw inside the grill that needs to be removed with a screwdriver first.
4. Once the grill is off, you will see the speaker secured by a few screws inside the door panel.
5. Use the Philips head screwdriver to loosen and remove them. If the screws are covered with plastic caps, you can pry them off with a flathead screwdriver.
6. Once the screws are removed, carefully pull the speaker out of the door panel. Be cautious not to damage the speaker or the door panel.
7. Disconnect the speaker wire connector by pressing down on the release tab and pulling the connector apart.
8. Remove the speaker from the vehicle.
9. To install a new speaker, simply reverse the removal process. Make sure to connect the speaker wire connector properly before securing the speaker in place with the screws.
Now, your rear side speakers should be removed successfully!
