1. Raise and safely support the vehicle.
2. Disconnect the negative battery cable.
3. Remove the front wheels.
4. Remove the skid plate (if equipped).
5. Disconnect the power steering hoses from the steering gear.
6. Use a flare nut wrench to loosen and remove the power steering lines from the steering gear.
7. Remove the power steering lines from the vehicle.
Installation:
1. Slide the new power steering lines into place.
2. Tighten the flare nuts on the power steering lines to the steering gear.
3. Connect the power steering hoses to the steering gear.
4. Replace the skid plate (if equipped).
5. Reinstall the front wheels.
6. Connect the negative battery cable.
7. Test the power steering system for leaks.
