Auto >> AutoSPT >  >> Electric car

When you get to stop sign and go accelerate the car doesnt seem like it is getting gas wants stall have already replaced filter add fuel injection cleaner still cannot?

Possible causes:

Here are some possible causes of your car stalling when accelerating from a stop sign:

- Faulty fuel pump: The fuel pump is responsible for delivering fuel from the gas tank to the engine. If the fuel pump is not working properly, it may not be able to provide enough fuel to the engine, causing it to stall.

- Clogged fuel filter: The fuel filter helps to remove dirt and debris from the fuel before it reaches the engine. If the fuel filter is clogged, it may restrict the flow of fuel to the engine, causing it to stall.

- Dirty fuel injectors: Fuel injectors are responsible for spraying fuel into the engine's cylinders. If the fuel injectors are dirty, they may not be able to spray fuel properly, causing the engine to stall.

- Vacuum leak: A vacuum leak can cause the engine to run lean, which means that it is not getting enough fuel. This can cause the engine to stall, especially when accelerating from a stop sign.

- Faulty oxygen sensor: The oxygen sensor helps the engine to control the air/fuel mixture. If the oxygen sensor is not working properly, it may provide incorrect information to the engine, causing it to run lean and stall.

Steps to take:

Here are some steps you can take to troubleshoot the problem:

- Check the fuel pressure: Use a fuel pressure gauge to check the fuel pressure in the fuel line. The fuel pressure should be within the range specified by the manufacturer.

- Inspect the fuel filter: Remove the fuel filter and inspect it for dirt and debris. If the fuel filter is clogged, replace it.

- Clean the fuel injectors: Use a fuel injector cleaner to clean the fuel injectors. Follow the instructions on the fuel injector cleaner package.

- Check for vacuum leaks: Use a smoke machine to check for vacuum leaks. If you find any vacuum leaks, seal them up.

- Test the oxygen sensor: Remove the oxygen sensor and test it with a multimeter. The oxygen sensor should produce a voltage signal that varies between 0.1 volts and 0.9 volts.

If you are unable to resolve the problem on your own, you may need to take your car to a qualified mechanic for further diagnosis and repair.