How do you remove the drivers side airbag on 2003 Kia Spectra?

1. Disconnect the battery. This is the most important step, as it will prevent the airbag from accidentally deploying while you are working on it. To disconnect the battery, open the hood of your car and locate the negative battery terminal. It is usually marked with a "-" sign. Use a wrench to loosen the bolt that holds the negative battery cable in place, and then remove the cable from the terminal.

2. Remove the steering wheel. Once the battery is disconnected, you can remove the steering wheel. To do this, you will need a special tool called a steering wheel puller. You can rent this tool from most auto parts stores. Once you have the steering wheel puller, follow the instructions that came with it to remove the steering wheel.

3. Remove the airbag module. The airbag module is located behind the steering wheel. It is held in place by a few bolts. Use a wrench to loosen the bolts, and then carefully remove the airbag module.

4. Disconnect the airbag module. Once the airbag module is removed, you will need to disconnect it from the electrical system. To do this, locate the electrical connector on the back of the airbag module. Press down on the release tab and pull the connector apart.

5. Reinstall the steering wheel. Once the airbag module is disconnected, you can reinstall the steering wheel. Follow the instructions that came with your steering wheel puller to do this.

6. Reconnect the battery. Once the steering wheel is reinstalled, you can reconnect the battery. To do this, simply reconnect the negative battery cable to the negative battery terminal and tighten the bolt.