1. Park your car on a level surface and turn off the engine.
2. Open the hood of your car and disconnect the negative terminal of the battery.
3. Locate the power steering hose.
It is the rubber hose that connects the power steering pump to the steering rack.
4. Loosen the hose clamps that hold the power steering hose in place.
Use a wrench to loosen the hose clamps.
5. Remove the old power steering hose.
Pull the old power steering hose off the power steering pump and steering rack.
6. Install the new power steering hose.
Push the new power steering hose onto the power steering pump and steering rack.
7. Tighten the hose clamps.
Use a wrench to tighten the hose clamps.
8. Reconnect the negative terminal of the battery.
9. Start your car and test the power steering.
Turn the steering wheel left and right to make sure that the power steering is working properly.
That's it! You have successfully replaced the power steering hose on your 1983 Chevrolet Camaro.
