-10mm socket wrench
-15mm socket wrench
-Breaker bar
-Ratchet
-Extension
Here are the steps:
1.) Open the hood of your vehicle and locate the serpentine belt. It is located on the front of the engine and is wrapped around several pulleys.
2.) Use the 15mm socket wrench to loosen the tensioner pulley bolt. This bolt is located on the top of the engine, near the front.
3.)Once the tensioner pulley bolt is loosened, use the breaker bar and ratchet to pry the tensioner pulley away from the belt.
4.)With the tensioner pulley pried away, use the 10mm socket wrench to remove the idler pulley bolt. This bolt is located on the bottom of the engine, near the front.
5.) Once the idler pulley bolt is removed, the belt can be removed from the engine.
6.)To install the new belt, simply reverse the steps above.
*Note: If the serpentine belt is damaged or cracked, it should be replaced immediately to avoid further damage to the engine.
