The blower motor relay for a 1991 Honda Accord is located in the passenger compartment, under the dashboard. To access the relay, you will need to remove the lower dashboard panel on the passenger side. Once the panel is removed, you will see the blower motor relay located in the center of the dashboard, behind the glove box. It is a small, black relay with a single wire connector.
Here are the detailed steps on how to locate the blower motor relay in a 1991 Honda Accord:
1. Park your vehicle in a safe location and turn off the engine.
2. Open the passenger door and remove the floor mat.
3. Locate the lower dashboard panel on the passenger side. It is a plastic panel that runs along the bottom of the dashboard.
4. There are four screws that hold the lower dashboard panel in place. Remove the screws using a Phillips head screwdriver.
5. Once the screws are removed, you can pry the lower dashboard panel off the car by gently pulling on it. Start from the bottom of the panel and work your way up.
6. Once the lower dashboard panel is removed, you will see the blower motor relay located in the center of the dashboard.
7. The blower motor relay is a small, black relay with a single wire connector. It is located behind the glove box.
If you are experiencing problems with your blower motor, it is possible that the relay is faulty. You can test the relay by swapping it with another relay of the same type. If the blower motor starts working when you swap the relay, then you know that the original relay was faulty and needs to be replaced.
