1. Make sure the vehicle is in Park and turned off.
2. Open the driver's door and insert the key into the ignition.
3. Turn the key to the "On" position, but do not start the vehicle.
4. Within 5 seconds, press and hold the power lock button on the driver's door for at least 10 seconds.
5. The alarm should disarm and the LED indicator light should turn off.
6. Turn the key to the "Off" position and remove it from the ignition.
If this method does not work, you may need to disconnect the alarm system's power supply in order to reset it. To do this, you can follow these steps:
1. Locate the alarm system's control unit, which is typically located under the dashboard or behind the radio.
2. Remove the cover of the control unit to expose the wiring.
3. Locate the power wire for the alarm system and disconnect it from the battery.
4. Wait at least 10 seconds, then reconnect the power wire.
5. Replace the cover of the control unit.
6. The alarm should now be reset.
If you are unable to reset the alarm system yourself, you may need to take your vehicle to a qualified mechanic or an automotive locksmith for assistance.
