1. Open the hood of your Corvette.
2. Locate the running light assemblies on both sides of the front of the car.
3. Use a Phillips head screwdriver to remove the two screws that hold each running light assembly in place.
4. Pull the running light assembly straight out of the housing.
5. Disconnect the electrical connector from the back of the running light assembly.
6. Remove the old bulb from the socket by turning it counterclockwise.
7. Insert the new bulb into the socket and turn it clockwise until it is secure.
8. Reconnect the electrical connector to the back of the running light assembly.
9. Position the running light assembly into the housing and replace the two screws that you removed in step 3.
10. Close the hood of your Corvette.
