Auto >> AutoSPT >  >> Electric car

I wish to replace the aerial on an 80 series Toyota Land Cruiser with a power How does one get at aerial. Does have remove LH fender?

To replace the antenna on an 80 series Toyota Land Cruiser without removing the LH fender follow these steps:

1. Open the hood of the vehicle.

2. Locate the antenna base, which is mounted on the rear passenger side of the vehicle.

3. Remove the two bolts that hold the base to the vehicle using wrench.

4. Disconnect the antenna wire from the base.

5. Remove the old antenna from the base.

6. Install the new antenna into the base.

7. Connect the antenna wire to the new antenna.

8. Replace the two bolts that hold the base to the vehicle.

9. Close the hood of the vehicle.