2. Disconnect the speaker wires. There will be two wires, one for the positive terminal and one for the negative terminal. Use a screwdriver to release the speaker wires from the terminals.
3. Remove the old speakers. There will be four screws holding each speaker in place. Remove the screws and lift the speaker out of the vehicle.
4. Install the new speakers. Connect the speaker wires to the positive and negative terminals, being sure to align the black stripe on the negative terminal with the black wire that you're removing. Secure the speakers with the four screws that you removed in step 3.
5. Snap the speaker grilles back into place. You're all done!
