- Phillips screwdriver
- Flat-head screwdriver
Instructions:
1. Turn off the engine and allow the vehicle to cool down.
2. Locate the climate control panel on the dashboard.
3. Use the Phillips screwdriver to remove the two screws that hold the climate control panel in place.
4. Gently pry the climate control panel out of the dashboard using the flat-head screwdriver.
5. Disconnect the electrical connector from the back of the climate control panel.
6. Remove the old light bulb from the socket.
7. Install the new light bulb into the socket.
8. Reconnect the electrical connector to the back of the climate control panel.
9. Snap the climate control panel back into place in the dashboard.
10. Secure the climate control panel with the two screws that you removed earlier.
11. Turn on the engine and test the new light bulb.
