1. Remove the glove box.
2. Locate the blower resistor, which is a small, black box with a few wires connected to it.
3. Disconnect the wires from the blower resistor.
4. Remove the blower resistor by unscrewing the two screws that hold it in place.
Here are some additional details on how to access the blower resistor on a 2004 Honda Odyssey:
1. To remove the glove box, open it all the way and then squeeze the sides of the box to release it from the clips.
2. The blower resistor is located on the left side of the climate control housing, behind the glove box.
3. The blower resistor is a small, black box with a few wires connected to it.
4. To disconnect the wires from the blower resistor, simply press down on the tabs on the connectors and pull the wires out.
5. To remove the blower resistor, unscrew the two screws that hold it in place.
Once the blower resistor is removed, you can replace it with a new one. To install the new blower resistor, simply reverse the steps above.
Here are some tips for replacing the blower resistor on a 2004 Honda Odyssey:
* Make sure that the new blower resistor is the correct one for your vehicle.
* Disconnect the negative battery terminal before starting the repair.
* Be careful when working with the wires, as they can be easily damaged.
* If you have any questions, don't hesitate to consult a qualified mechanic.
