* A ratchet and socket set
* A pry bar
* A new serpentine belt
1. Park the Caravan in a safe location and turn off the engine.
2. Open the hood of the Caravan.
3. Locate the serpentine belt tensioner. It is located on the passenger side of the engine, near the top.
4. Use the ratchet and socket set to loosen the bolt that holds the tensioner in place.
5. Use the pry bar to pry the tensioner away from the belt.
6. Remove the old serpentine belt.
7. Install the new serpentine belt.
8. Use the pry bar to pry the tensioner back into place.
9. Tighten the bolt that holds the tensioner in place.
10. Close the hood of the Caravan.
Now that you have installed a new serpentine belt on your Dodge Caravan, you can be confident that your engine will be properly cooled and powered.
