1. Open the hood of your vehicle and locate the engine oil filter housing. It is typically located on the front side of the engine block.
2. If there is an oil filter cap, remove it.
3. Unscrew the oil filter counterclockwise with an oil filter wrench.
4. Apply a thin coat of new engine oil to the new oil filter gasket.
5. Screw the new oil filter clockwise until it is snug.
6. Replace the oil filter cap (if applicable).
7. Lower the hood of your vehicle.
Additional tips:
- Be sure to use the correct oil filter for your vehicle. The owner's manual will specify the correct oil filter size and type.
- When removing the oil filter, be careful not to spill any oil.
- If you have difficulty removing the oil filter, you can try using an oil filter wrench.
- After changing the oil filter, be sure to check the oil level and add oil as needed.
