1. Park your Camaro in a safe location and turn off the engine. Engage the parking brake.
2. Open the hood of your Camaro. To do this, pull the hood release lever located inside the car on the driver's side footwell.
3. Locate the turn signal assembly. It is located on the front of your Camaro, on either side of the headlights.
4. Remove the turn signal assembly. To do this, use a Phillips head screwdriver to remove the two screws that hold the assembly in place.
5. Disconnect the electrical connector from the turn signal assembly.
6. Remove the old turn signal bulb. To do this, twist the bulb counterclockwise until it comes out of the socket.
7. Install the new turn signal bulb. To do this, insert the new bulb into the socket and turn it clockwise until it is secure.
8. Reconnect the electrical connector to the turn signal assembly.
9. Install the turn signal assembly back into the Camaro. To do this, align the holes in the assembly with the holes in the Camaro and insert the screws. Tighten the screws until the assembly is secure.
10. Close the hood of your Camaro.
11. Test the turn signal to make sure it is working properly.
