1. Prep your vehicle. Turn off the engine and apply the parking brake. If possible, park your vehicle on a level surface.
2. Locate your fuel pump. The fuel pump is usually located inside the fuel tank. In some cases, it may be mounted outside the tank. Consult your vehicle repair manual for the exact location of the fuel pump in your 1998 Dodge Ram pickup.
3. Remove the fuel tank. In most cases, you will need to remove the fuel tank in order to access the fuel pump. To remove the fuel tank, first disconnect the fuel lines and electrical connectors. Then, remove the bolts that hold the fuel tank in place. Be careful not to damage the fuel tank when removing it.
4. Remove the old fuel pump. Once you have removed the fuel tank, you will be able to access the fuel pump. To remove the old fuel pump, first disconnect the electrical connectors and fuel lines. Then, unscrew the bolts that hold the fuel pump in place. Be careful not to damage the fuel pump when removing it.
5. Install the new fuel pump. Insert the new fuel pump into the fuel tank and secure it with the bolts. Reconnect the electrical connectors and fuel lines.
6. Replace the fuel tank. Replace the fuel tank and secure it with the bolts. Reconnect the fuel lines and electrical connectors.
7. Test the fuel pump. Once you have installed the new fuel pump, test it to make sure that it is working properly. Turn on the ignition and listen for the fuel pump to run for a few seconds. Then, start the engine and check for any leaks.
Once you have completed all of these steps, you will have successfully replaced the fuel pump in your 1998 Dodge Ram pickup.
