It works off of the ignition switch and powers the radio and climate control. Replacing a blown EATX fuse is relatively easy and can be done by following these steps:
1. Locate the fuse box. In most Dodge Caravans, the fuse box is located under the steering wheel.
2. Open the fuse box. There will be a small lever or button on the side of the fuse box that you can press to release the cover.
3. Find the EATX fuse. The EATX fuse is usually a 10-amp fuse. It will be labeled "EATX" or "Early Activation Transfer."
4. Remove the blown fuse. Use a pair of needle-nose pliers to carefully remove the blown fuse from the fuse box.
5. Insert a new fuse. Make sure that the new fuse is the same amperage as the old fuse.
6. Close the fuse box. Replace the cover of the fuse box and press down on it until it clicks into place.
