* A flat-head screwdriver
* A Phillips-head screwdriver
* A ratchet set
* A socket set
* An extension bar
Instructions:
1. Disconnect the battery.
2. Remove the four screws that hold the ignition switch bezel in place.
3. Pry the bezel off of the steering column.
4. Remove the two screws that hold the ignition switch assembly in place.
5. Unplug the electrical connector from the ignition switch.
6. Use a ratchet and socket to remove the two nuts that hold the ignition switch in place.
7. Pull the ignition switch out of the steering column.
