Locate the side panels: There are usually two side panels on a Triumph Tiger, one on each side of the fuel tank. They may be secured with bolts or screws.
Remove the side panels: Remove the bolts or screws holding the side panels in place and carefully remove the panels.
Find the air filter housing: The air filter housing is typically located behind one of the side panels.
Remove the air filter housing cover: Open the air filter housing by unlatching or unscrewing the cover.
Take out the air filter: Once the housing cover is removed, you should be able to easily access and remove the air filter. It is usually held in place by a clamp or a twist-lock mechanism.
Inspect and clean or replace the air filter: Check the air filter for dirt, dust, or other debris. If it is excessively dirty, it will need to be cleaned or replaced.
Reinstall the air filter and housing cover: After cleaning or replacing the air filter, put the housing cover back on and secure it properly.
Reinstall the side panels: Reattach the side panels to the motorcycle, ensuring the bolts or screws are tightened securely.
By following these steps, you can successfully access and maintain the air filter on your Triumph Tiger.
