The oil drain bolt is located at the bottom of the engine, on the left side. It is a 17mm bolt.
To drain oil:
1. Place an oil pan under the oil drain bolt.
2. Loosen the oil drain bolt with a 17mm wrench.
3. Allow the oil to drain completely.
4. Replace the oil drain bolt and tighten it to 14 ft-lbs.
Oil Filter location
The oil filter is located on the right side of the engine, near the top. It is a cylindrical shaped object with a black cap.
To replace the oil filter:
1. Remove the oil filter cap with a 17mm wrench.
2. Remove the old oil filter.
3. Apply a thin coat of new oil to the gasket of the new oil filter.
4. Screw on the new oil filter until it is snug.
5. Replace the oil filter cap and tighten it to 14 ft-lbs.
