1. Remove the left side cover of the motorcycle. There should be two screws holding the cover in place, one at the front and one at the rear. Remove these screws and pull the left side cover straight off.
2. Locate the fuse block. The fuse block is a black plastic box with a clear plastic cover. It is located near the top of the left side cover, just behind the ignition coil.
3. Flip up the clear plastic cover of the fuse block. This will expose the fuses.
4. Inspect the fuses. If any of the fuses are blown, they will need to be replaced. To replace a fuse, simply pull the old fuse out of its slot and insert a new fuse in its place. Make sure that the new fuse is the same amperage as the old fuse.