The oil plug on a 2000 Heritage Softail is located on the bottom of the oil tank, near the rear of the motorcycle. It is a 17mm hex head bolt, and it can be accessed by removing the oil tank skid plate.
Here are the steps to remove the oil plug on a 2000 Heritage Softail:
1. Park the motorcycle on a level surface.
2. Turn off the engine and allow it to cool down.
3. Remove the oil tank skid plate by removing the two bolts that hold it in place.
4. Locate the oil plug on the bottom of the oil tank.
5. Use a 17mm hex wrench to loosen the oil plug.
6. Be careful not to drop the oil plug into the oil tank.
7. Allow the oil to drain completely from the oil tank.
8. Reinstall the oil plug and tighten it securely.
9. Reinstall the oil tank skid plate.
Note: It is important to use a new oil plug washer when reinstalling the oil plug. This will help to prevent leaks.
