1. Remove the air filter cover.
2. Start the engine and let it warm up to operating temperature.
3. Turn the idle speed screw to adjust the idle to the specified setting (refer to the owner's manual for the correct setting).
4. Turn the air/fuel mixture screw to adjust the mixture to the desired setting. (Turn the screw out to lean out the mixture, and turn it in to enrich the mixture).
5. Test ride the motorcycle and make any necessary adjustments to the idle speed and air/fuel mixture screws for best performance.
6. Replace the air filter cover.
Note: Be careful not to overtighten the idle speed screw or air/fuel mixture screw, as this could damage the carburetor. Additionally, remember that the carburetor settings will likely require adjustment based on variations such as altitude, temperature, humidity, and riding conditions, so you should always consult the owner's manual for specific guidance.
