What are ford 5.0 ho engine specs?

The Ford 5.0L HO (High Output) engine specs vary slightly depending on the year and application (Mustang, truck, etc.). There's no single definitive answer. However, here's a general overview of what you can expect for a typical 5.0L HO in a Mustang application (which is where the term "HO" is most commonly associated):

General Characteristics:

* Displacement: 4951 cc (5.0 liters)

* Configuration: V8, pushrod

* Aspiration: Naturally aspirated (though some versions may have forced induction aftermarket)

Typical Specs (These can vary year to year. Always check the specific year and application):

* Horsepower: Ranges from around 300 hp to over 480 hp depending on the year and specific engine tuning (Coyote engine variants). Older 5.0 HO engines produced less.

* Torque: Varies depending on the year and specific engine tuning, but generally in the range of 300-400 lb-ft.

* Compression Ratio: Varies depending on the year and specific application.

* Fuel System: Multi-port electronic fuel injection.

* Block Material: Cast iron.

* Heads: Aluminum.

To get the precise specifications for a particular Ford 5.0L HO engine, you must specify the:

* Year: (e.g., 1987, 2011, 2023)

* Vehicle Model: (e.g., Mustang GT, F-150, etc.)

With this information, you can find the exact specifications in a repair manual for that specific vehicle or on Ford's website (though older model data may be limited).